ISO 9001:2008ISO 9001
Certified
A POWERFUL SOLUTION
  • <b>TowerGuard 2000®</b> XLP AL 2kV RHH/RHW-2

    Applications

    • For use from the lower control box at the base of the wind power tower and out to the stepup transformer through conduit
    • For use in free air, raceways or direct burial in accordance with NEC. 
    • Industrial environments where superior insulation toughness and chemical resistance is required
    • Maximum operating temperature not to exceed 90 ºC in wet or dry locations
    Product Construction
    Conductor: 8 AWG thru 1000 kcmil compacted aluminum ACM (AA-8000 Series)
    Insulation: Flame-retardant Cross-Linked Polyethylene (XLPE) - Black
    Print: TOWERGUARD 2000® XLP AWG/KCMIL TYPE RHH/RHW-2 SR CT (UL) 2000V (MM/YYYY) SEQUENTIAL FOOTAGE MARK [Sizes smaller than 1/0 AWG do not include the "CT" marking]

    Compliances
    • National Electric Code (NEC)
    • UL 44 Stranded for rubber-insulated wires and cables
    • "CT" for 1/0 AWG and larger in accordance with NEC
    • ICEA S-95-685/NEMA WC70
    • UL listed as Type RHH/RHW-2
    • OSHA acceptable
    Features
    • Rated at 90 ºC wet or dry
    • UV resistant - black is marked SR
    • Excellent electrical, thermal and physical properties
    • Excellent resistance to moisture
    • Excellent resistance to crush, compression cuts and heat deformation
    Packaging

    Stocked in 3 colors - Black with 3 Red Stripes, Black with 3 Yellow Stripes, Black with 3 Orange Stripes
    All produced or cut-to-order material will be shipped on non-returnable wooden reels unless specifically requested

FacebookTweeterLinkedInYouTube
Privacy     Site Map     Catalog IndexSite created by Thomas Web Solutions and Powered by Navigator Platform© 2017, American Wire Group