TOWERGUARD® Aluminum XLP UL RHH/RHW-2 or USE-2 90°C 2kV


All Categories > Low Voltage Cables > TOWERGUARD® Aluminum XLP UL RHH/RHW-2 or USE-2 90°C 2kV > TOWERGUARD® Aluminum XLP UL RHH/RHW-2 or USE-2 90°C 2kV - CT Rated > View Items


	TOWERGUARD® Aluminum XLP UL RHH/RHW-2 or USE-2 90°C 2kV - CT Rated
	Check up to five results to perform an action.

	larger image		Applications For use from the lower control box at the base of the wind power tower and out to the step-up transformer through conduit For use in free air, raceways or direct burial in accordance with NEC. Industrial environments where superior insulation toughness and chemical resistance is required Maximum operating temperature not to exceed 90 ºC in wet or dry locations Product Construction Conductor: 8 AWG thru 1000 kcmil compacted aluminum ACM (AA-8000 Series) Insulation: Flame-retardant Cross-Linked Polyethylene (XLPE) - Black Print: TOWERGUARD 2000® XLP AWG/KCMIL TYPE RHH/RHW-2 SR (UL) 2000V (MM/YYYY) SEQUENTIAL FOOTAGE MARK [Sizes 1/0 AWG and larger include the "CT" marking] Compliances National Electric Code (NEC) UL 44 Stranded for rubber-insulated wires and cables "CT" for 1/0 AWG and larger in accordance with NEC ICEA S-95-685/NEMA WC70 UL listed as Type RHH/RHW-2 OSHA acceptable Features Rated at 90 ºC wet or dry UV resistant - black is marked SR Excellent electrical, thermal and physical properties Excellent resistance to moisture Excellent resistance to crush, compression cuts and heat deformation Packaging Colors optional, to order. All produced or cut-to-order material will be shipped on non-returnable wooden reels unless specifically requested

Results Per Page :

TOWERGUARD® Aluminum XLP UL RHH/RHW-2 or USE-2 90°C 2kV - CT Rated