Applications

• For use from the lower control box at the base of the wind power tower and out to the stepup transformer through conduit
• For use in free air, raceways or direct burial in accordance with NEC. 
• Industrial environments where superior insulation toughness and chemical resistance is required
• Maximum operating temperature not to exceed 90 ºC in wet or dry locations

Product Construction
Conductor: 8 AWG thru 1000 kcmil compacted aluminum ACM (AA-8000 Series)
Insulation: Flame-retardant Cross-Linked Polyethylene (XLPE) - Black
Print: TOWERGUARD 2000® XLP AWG/KCMIL TYPE RHH/RHW-2 SR CT (UL) 2000V (MM/YYYY) SEQUENTIAL FOOTAGE MARK [Sizes smaller than 1/0 AWG do not include the "CT" marking]

Compliances

• National Electric Code (NEC)
• UL 44 Stranded for rubber-insulated wires and cables
• "CT" for 1/0 AWG and larger in accordance with NEC
• ICEA S-95-685/NEMA WC70
• UL listed as Type RHH/RHW-2
• OSHA acceptable

Features

• Rated at 90 ºC wet or dry
• UV resistant - black is marked SR
• Excellent electrical, thermal and physical properties
• Excellent resistance to moisture
• Excellent resistance to crush, compression cuts and heat deformation

Packaging

Stocked in 3 colors - Black with 3 Red Stripes, Black with 3 Yellow Stripes, Black with 3 Orange Stripes
All produced or cut-to-order material will be shipped on non-returnable wooden reels unless specifically requested