MV Cable in Duct On American Wire Group

Duct Materials
The duct shall be extruded from either medium density polyethylene type II, class C, category 5, or high density polyethylene type III, class C, category 5 as outlined in ASTM D1248.

Duct Dimensions
The following duct dimensions are recommended, however, AWG will provide duct to customer's required dimensions when specified.

The cable shown in the illustration is
PowerGuard® 35kV MV Aluminum TR-XLPE Collection System Cable LLDPE Jacket UL MV-90/AEIC CS8-07

1 - 3 of 3 | Results Per Page | View | Unit of Measure

Request Information Compare Items

Item #	Conduit Size	Conduit Outer Diameter	Minimum Wall Thickness	Bending Radius	Max. Cable Diameter	Typical Unjacketed Cond. Size	Elongation	Melt Index Max.	Brittleness Temp. ºC max. Medium	Brittleness Temp. ºC max. High

1-1/4	N/A 1 1/4 Inches	N/A 1.66 Inches	N/A 100 mls	N/A 18 Inches	N/A 1.05 Inches	N/A #2 through 2/0	N/A 400 %	N/A .4	N/A -45 ºC	N/A -75 ºC
1-1/2	N/A 1 1/2 Inches	N/A 1.90 Inches	N/A 115 mls	N/A 21 Inches	N/A 1.20 Inches	N/A 1/0 through 250	N/A 400 %	N/A .4	N/A -45 ºC	N/A -75 ºC
2	N/A 2 Inches	N/A 2.38 Inches	N/A 145 mls	N/A 26 Inches	N/A 1.5 Inches	N/A 4/0 through 500	N/A 400 %	N/A .4	N/A -45 ºC	N/A -75 ºC

1 - 3 of 3 | Results Per Page | View | Unit of Measure