Applications
This cable is designed for high voltage connections between power distribution systems in mines, mine tunnels, shafts, and mine load centers where continuous monitoring of the ground system is required. This cable is suitable for installation in Ducts, troughs, tray or direct burial for non-flexing service.

Construction
  • Conductor is stranded annealed copper enveloped in a strand shield.
  • Insulation is Ethylene Propylene Rubber (EPR) or Cross Linked Polyethylene (XLPE).
  • Assembly is semi-conducting tape and a metallic tape shield with grounding conductors consisting of two bare grounds and one 8-gauge insulated ground check that are cabled together in the interstices of the power conductors and fillers are added to make round.
  • A single faced rubber filled tape is applied overlapped.
  • Jacket is Polyvinylchloride (PVC).
  • Jacket Options - Chlorinated Polyethylene (CPE) or Hypalon (CPSE).
Standards
Conforms to ICEA S-66-524 (NEMA WC8).

Notes
  • Shipping tolerance +/- 10%
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1 

Item #

Power
Conductors
Size AWG

Power
Conductors
# of Strands

Power
Conductors
Insulation
Thickness

Ground Wire
Size AWG

Ground Wire
# of Strands

Jacket
Thickness
(Inches)

Overall
Diameter

Net Weight
Per MFT

Sort by
N/A 2 N/A 7 N/A 0.175 Inches N/A 6 N/A 7 N/A .190 N/A 1.88 Inches N/A 2190 Lbs
N/A 1/0 N/A 19 N/A 0.175 Inches N/A 4 N/A 7 N/A 0.14 N/A 2.05 Inches N/A 2890 Lbs
N/A 2/0 N/A 19 N/A 0.175 Inches N/A 3 N/A 7 N/A 0.14 N/A 2.15 Inches N/A 3350 Lbs
N/A 4/0 N/A 19 N/A 0.175 Inches N/A 1 N/A 7 N/A 0.14 N/A 2.4 Inches N/A 4610 Lbs
N/A 250 N/A 37 N/A 0.175 Inches N/A 1/0 N/A 19 N/A 0.14 N/A 2.5 Inches N/A 4990 Lbs
N/A 350 N/A 37 N/A 0.175 Inches N/A 2/0 N/A 19 N/A 0.14 N/A 2.75 Inches N/A 6380 Lbs
N/A 500 N/A 37 N/A 0.175 Inches N/A 4/0 N/A 19 N/A 0.14 N/A 3.1 Inches N/A 8770 Lbs
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1