Type MP-GC 3-Conductor - EPR/CPE or XLP/CPE 5kV) 100% Insulation Level (Grounded) 90°C On American Wire Group


All Categories > Control Cables & Portable Power Cables > Portable Power Cables > Type MP-GC (Mine Power Feeder) > Type MP-GC 3-Conductor EPR/CPE or XLP/CPE 5kV 100% Insulated Level (Grounded) 90°C > Type MP-GC 3-Conductor - EPR/CPE or XLP/CPE 5kV) 100% Insulation Level (Grounded) 90°C > View Items


	Type MP-GC 3-Conductor - EPR/CPE or XLP/CPE 5kV) 100% Insulation Level (Grounded) 90°C
	Check up to five results to perform an action.

	larger image		Applications This cable is designed for high voltage connections between power distribution systems in mines, mine tunnels, shafts, and mine load centers where continuous monitoring of the ground system is required. This cable is suitable for installation in Ducts, troughs, tray or direct burial for non-flexing service. Construction Conductor is stranded annealed copper enveloped in a strand shield. Insulation is Ethylene Propylene Rubber (EPR) or Cross Linked Polyethylene (XLPE). Assembly is semi-conducting tape and a metallic tape shield with grounding conductors consisting of two bare grounds and one 8-gauge insulated ground check that are cabled together in the interstices of the power conductors and fillers are added to make round. A single faced rubber filled tape is applied overlapped. Jacket is Chlorinated Polyethylene (CPE). Standards Conforms to ICEA S-66-524 (NEMA WC8). Notes Shipping tolerance +/- 10%

Results Per Page :

Type MP-GC 3-Conductor - EPR/CPE or XLP/CPE 5kV) 100% Insulation Level (Grounded) 90°C