Applications
This cable is designed for high voltage connections between power distribution systems in mines, mine tunnels, shafts, and mine load centers where continuous monitoring of the ground system is required. This cable is suitable for installation in Ducts, troughs, tray or direct burial for non-flexing service.

Construction
  • Conductor is stranded annealed copper enveloped in a strand shield.
  • Insulation is Ethylene Propylene Rubber (EPR) or Cross Linked Polyethylene (XLPE).
  • Assembly is semi-conducting tape and a metallic tape shield with grounding conductors consisting of two bare grounds and one 8-gauge insulated ground check that are cabled together in the interstices of the power conductors and fillers are added to make round.
  • A single faced rubber filled tape is applied overlapped.
  • Jacket is Chlorinated Polyethylene (CPE).
Standards
Conforms to ICEA S-66-524 (NEMA WC8).

Notes
  • Shipping tolerance +/- 10%
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 

Item #

Power
Conductors
Size AWG

Power
Conductors
# of Strands

Power
Conductors
Insulation
Thickness

Ground Wire
Size AWG

Ground Wire
# of Strands

Overall
Diameter

Jacket
Thickness
(Inches)

Net Weight
Per MFT

Sort by
N/A 4 N/A 7 N/A .090 Inches N/A 7 N/A 7 N/A .110 Inches N/A 1.32 N/A 1240 Lbs
N/A 2 N/A 7 N/A .090 Inches N/A 5 N/A 7 N/A .110 Inches N/A 1.45 N/A 1670 Lbs
N/A 1/0 N/A 19 N/A .090 Inches N/A 3 N/A 7 N/A .110 Inches N/A 1.63 N/A 2300 Lbs
N/A 2/0 N/A 19 N/A .090 Inches N/A 2 N/A 7 N/A .140 Inches N/A 1.75 N/A 2730 Lbs
N/A 4/0 N/A 19 N/A .090 Inches N/A 1/0 N/A 19 N/A .140 Inches N/A 2.00 N/A 3490 Lbs
N/A 250 N/A 37 N/A .090 Inches N/A 1/0 N/A 19 N/A .140 Inches N/A 2.13 N/A 4620 Lbs
N/A 350 N/A 37 N/A .090 Inches N/A 2/0 N/A 19 N/A .140 Inches N/A 2.35 N/A 5940 Lbs
N/A 500 N/A 37 N/A .090 Inches N/A 4/0 N/A 19 N/A .170 Inches N/A 2.64 N/A 8160 Lbs
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1