Applications
This cable is for wiring down tower applications and may be used on electrically driven, earth moving equipment, battery energy storage, as power supply to A.C. welding equipment, as water heater leads, and in motor and power lead applications. May be installed in wet or dry areas, conduit, ducts, trays or troughs.

Construction

• Conductor is extra flexible tinned, stranded copper with a separator layer.
• EPR insulation.
• Jacket is LSOH (Low Smoke Zero Halogen).  CPE Jacket available upon request.

Standards

• ASTM 83 - Soft or Annealed Copper
• ASTM 833 - Tinned Soft or Annealed Copper
• ASTM 8172 - Rope-Lay-Stranded Copper Conductors Having Bunch Stranded Members
• UL 44 - Type RHH/RHW-2
• UL 1685 - Fire-Propagation and Smoke-Release Test
• UL Subject 2806 - Type DLO
• CSA C22.2 No. 38 - Type RW90. (#12 and #10 AWG are not RW90)
• Meets flame test requirements of MSHA and passes ICEA cold bend test at -40 ºC.
• IEEE 1202/FT 4 - Flame Test  #8 and larger CSA. 1 /0 and larger UL
• ICEA S-95-658 (NEMA WC70) Power cables rated 2000 volts or less for the distribution of electrical energy

Notes

• Ampacity based on single conductor in free air, 90 ºC conductor temperature, 40 ºC ambient per ICEA S-75-381.
• Sequential footage marks.
• Shipping tolerance +/- 10%