260 MIL TRXLP 25kV Primary URD Concentric Neutral LLDPE Jacket AEIC CS8-07 One Third Neutral, 100% Insulation Level, Copper Conductor On American Wire Group


All Categories > Medium Voltage Cables > 15-35kV Primary URD Concentric Neutral AEIC CS8-07 > 25kV Primary URD Concentric Neutral LLDPE Jacket AEIC CS8-07 > TRXLP 25kV Primary URD Concentric Neutral LLDPE Jacket AEIC CS8-07 > 260 MIL TRXLP 25kV Primary URD Concentric Neutral LLDPE Jacket AEIC CS8-07 One Third Neutral, 100% Insulation Level, Copper Conductor > View Items


	260 MIL TRXLP 25kV Primary URD Concentric Neutral LLDPE Jacket AEIC CS8-07 One Third Neutral, 100% Insulation Level, Copper Conductor
	Check up to five results to perform an action.

	larger image		Applications For use on single phase and three phase primary underground distribution systems operating at 25 kV phase to phase at 100 % insulation level. Suitable for either direct burial or installation in ducts. Construction Copper concentrically stranded compressed conductor, triple single head extruded conductor shield, TRXLPE (tree-retardant cross-linked polyethylene insulation and easy strippable insulation shield, all dry nitrogen cured; solid bare copper wires uniformly spaced around the cable as a concentric neutral; LLDPE jacket with extruded longitudinal colored stripes, surface printed. Standards AEIC CS8 Specification for Extruded Dielectric Shielded Power Cables Rated 5 through 46 kV ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5,000 - 46,000 V ICEA T-31-610 Guide for Conducting a Longitudinal Water Penetration Resistance Tests on Blocked Conductors ICEA T-34-664 Test Method for Conducting Longitudinal Water Penetration Resistance Tests on Longitudinal Water Blocked Cables UL-1072 MV90 Options EPR insulation Filled strand Cable core water blocking Notes Ampacities are based on the NEC. Cable Tray: Three single cables, installed in uncovered cable tray in accordance with NEC Section 392.13; operating at 105 ºC conductor, at an ambient temperature of 40 ºC. Buried Duct: Three cables per duct operating at 105 ºC conductor, 20 ºC ground ambient, earth ρ = 90, 100 % load factor. Conduit in Air: Three cables per isolated conduit in air at 40 ºC operating at 105 ºC conductor (NEC Table 310.73). Maximum conductor temperature: 90 ºC normal continuous, 130 ºC overload, 250 ºC short circuit.