ISO 9001:2008ISO 9001
Certified
A POWERFUL SOLUTION

Applications

For installation in tray, trough, conduit, ducts, aerial and direct buried as allowed by the NEC. The cables can be used in main feeder, distribution, and branch circuits for industrial, commercial and electric utility installations. They may operate continuously in wet or dry locations at conductor tem-peratures not exceeding 105°C, at not more than 140°C. for emergency overload conditions and 250°C during shortcircuits. Suitable for systems rated 15 kV 100% insulation level (grounded systems). Suitable for Direct Burial. Sunlight Resistant.

Construction

Aluminum concentrically stranded compressed conductor; triple single head extruded conductor shield, EPR (ethylene propylene rubber) insulation and easy strippable insulation shield, all dry cured; bare copper tape shielded; surface printed black PVC jacket.

Standards

  • National Electrical Code (NEC)
  • UL-1072 MV-105
  • ICEA S-93-639/NEMA WC74
  • ICEA S-97-682
  • AEIC CS8
  • UL listed as Type MV-105 for use in accordance with NEC
  • Sizes 1/0 AWG and larger are listed and marked “Sunlight-Resistant FOR CT USE” in accordance with NEC

Notes

  • Ampacities are based on the NEC.
  • Cable Tray: Three single cables, installed in uncovered cable tray in accordance with NEC Section 392.13; operating at 105°C conductor, at an ambient temperature of 40°C.
  • Buried Duct: Three cables per duct operating at 105°C conductor, 20°C ground ambient, earth ρ = 90, 100% load factor.
  • Conduit in Air: Three cables per isolated conduit in air at 40°C; operating at 105°C conductor (NEC Table 310.73).
  • CPE or CSPE Jacket available.
1 - 9 of 9 | Results Per Page | View |
1 

Item #

Size/AWG

Insulation
Thickness

Conductor
Diameter

Insulation
Diameter

Overall
Diameter

Approximate
Weight
lbs/MFT

Insulation
Shield
Diameter

Ampacity
(Amps)
105°C
In
Duct

Ampacity
(Amps)
105°C
In
Air

A2-01PC15EPPU2 N/A 2 N/A .220" N/A .266” N/A 0.74" N/A 0.96" N/A 484 N/A 0.80" N/A 130 N/A 170
A1/0-01PC15EPPU2 N/A 1/0 N/A .220" N/A .336” N/A 0.81" N/A 1.03" N/A 566 N/A 0.87" N/A 165 N/A 225
A2/0-01PC15EPPU2 N/A 2/0 N/A .220" N/A .379” N/A 0.86" N/A 1.08" N/A 620 N/A 0.91” N/A 190 N/A 260
A4/0-01PC15EPPU2 N/A 4/0 N/A .220" N/A .479” N/A 0.96" N/A 1.18" N/A 761 N/A 1.01" N/A 245 N/A 350
A250-01PC15EPPU2 N/A 250 N/A .220" N/A .522” N/A 1.01" N/A 1.23" N/A 834 N/A 1.06" N/A 270 N/A 385
A350-01PC15EPPU2 N/A 350 N/A .220" N/A .622” N/A 1.11" N/A 1.33" N/A 992 N/A 1.16" N/A 330 N/A 480
A500-01PC15EPPU2 N/A 500 N/A .220" N/A .742” N/A 1.23" N/A 1.45" N/A 1216 N/A 1.28" N/A 400 N/A 600
A750-01PC15EPPU2 N/A 750 N/A .220" N/A .917” N/A 1.41" N/A 1.63" N/A 1574 N/A 1.47" N/A 490 N/A 780
A1000-01PC15EPPU2 N/A 1000 N/A .220" N/A 1.071” N/A 1.57" N/A 1.84" N/A 2028 N/A 1.62" N/A 565 N/A 940
1 - 9 of 9 | Results Per Page | View |
1 
FacebookTweeterLinkedInYouTube
Privacy     Site Map     Catalog IndexSite created by Thomas Web Solutions and Powered by Navigator Platform© 2017, American Wire Group