ISO 9001:2008ISO 9001
Certified
A POWERFUL SOLUTION
Applications
For installation in tray, trough, conduit, ducts, aerial and direct buried as allowed by the NEC. The cables can be used in main feeder, distribution, and branch circuits for industrial, commercial and electric utility installations. They may operate continuously in wet or dry locations at conductor temperatures not exceeding 105 ºC, at not more than 140 ºC. for emergency overload conditions and 250 ºC during short-circuits. Suitable for systems rated 5 kV/8 kV, 133 % insulation level (grounded systems).

Construction
Copper concentrically stranded compressed conductor; triple single head extruded conductor shield, EPR (ethylene propylene rubber) insulation and easy strippable insulation shield, all dry cured; bare copper tape shielded; surface printed black PVC jacket.

Standards
  • National Electrical Code (NEC)
  • UL-1072 MV-105
  • ICEA S-93-639/NEMA WC74
  • ICEA S-97-682
  • AEIC CS8
  • UL listed as Type MV-105 for use in accordance with NEC
  • Sizes 4/0 AWG and larger are listed and marked "Sunlight-Resistant FOR CT USE" in accordance with NEC
Notes
  • Ampacities are based on the NEC.
  • Cable Tray: Three single cables, installed in uncovered cable tray in accordance with NEC Section 392.13; operating at 105 ºC conductor, at an ambient temperature of 40 ºC.
  • Buried Duct: Three cables per duct operating at 105 ºC conductor, 20 ºC ground ambient, earth ρ = 90, 100 % load factor.
  • Conduit in Air: Three cables per isolated conduit in air at 40 ºC; operating at 105 ºC conductor (NEC Table 310.73).
  • CPE or CSPE Jacket available.
1 - 10 of 10 | Results Per Page | View | Unit of Measure
1 

Item #

Size
AWG or
KCMIL

Stranding

Insulation
Thickness
(mls)

Jacket
Thickness
(mils)

Diameter
Over
Insulation

Diameter
Over
Insulation
Shield

Diameter
Overall

Net Weight
Per MFT

Ampacity
1/C
in
Cable Tray

Ampacity
1/C
Conduit
In Air

Ampacity
1/C
Duct
Buried

105-175E2 N/A 2 N/A 7 N/A 175 N/A 70 N/A 0.700 Inches N/A 0.770 Inches N/A 1.000 Inches N/A 620 Lbs N/A N/A 165 Amps N/A 165 Amps
105-175E1/0 N/A 1/0 N/A 19 N/A 175 N/A 70 N/A 0.780 Inches N/A 0.860 Inches N/A 1.050 Inches N/A 780 Lbs N/A 290 Amps N/A 215 Amps N/A 215 Amps
105-175E2/0 N/A 2/0 N/A 19 N/A 175 N/A 70 N/A 0.820 Inches N/A 0.900 Inches N/A 1.090 Inches N/A 680 Lbs N/A 335 Amps N/A 245 Amps N/A 255 Amps
105-175E3/0 N/A 3/0 N/A 19 N/A 175 N/A 70 N/A 0.870 Inches N/A 0.950 Inches N/A 1.140 Inches N/A 1000 Lbs N/A 385 Amps N/A 275 Amps N/A 290 Amps
105-175E4/0 N/A 4/0 N/A 19 N/A 175 N/A 70 N/A 0.930 Inches N/A 1.010 Inches N/A 1.200 Inches N/A 1170 Lbs N/A 445 Amps N/A 315 Amps N/A 330 Amps
105-175E250 N/A 250 N/A 37 N/A 175 N/A 70 N/A 0.990 Inches N/A 1.070 Inches N/A 1.260 Inches N/A 1320 Lbs N/A 495 Amps N/A 345 Amps N/A 365 Amps
105-175E350 N/A 350 N/A 37 N/A 175 N/A 70 N/A 1.090 Inches N/A 1.190 Inches N/A 1.380 Inches N/A 1720 Lbs N/A 610 Amps N/A 415 Amps N/A 440 Amps
105-175E500 N/A 500 N/A 37 N/A 175 N/A 70 N/A 1.220 Inches N/A 1.320 Inches N/A 1.510 Inches N/A 2270 Lbs N/A 756 Amps N/A 500 Amps N/A 535 Amps
105-175E750 N/A 750 N/A 61 N/A 175 N/A 100 N/A 1.410 Inches N/A 1.510 Inches N/A 1.700 Inches N/A 3140 Lbs N/A 990 Amps N/A 610 Amps N/A 655 Amps
105-175E1000 N/A 1000 N/A 61 N/A 175 N/A 100 N/A 1.560 Inches N/A 1.680 Inches N/A 1.930 Inches N/A 4170 Lbs N/A 1185 Amps N/A 690 Amps N/A 755 Amps
1 - 10 of 10 | Results Per Page | View | Unit of Measure
1 
FacebookTweeterLinkedInYouTube
Privacy     Site Map     Catalog IndexSite created by Thomas Web Solutions and Powered by Navigator Platform© 2017, American Wire Group