Four Conductor Aluminum Jacketed MC Cable and Grounding Conductor 600V On American Wire Group


All Categories > Armored Cables > Aluminum 600V/2kV Jacketed MC Cable and Grounding Conductor > Four Conductor Aluminum Jacketed MC Cable and Grounding Conductor (600V) > Four Conductor Aluminum Jacketed MC Cable and Grounding Conductor 600V > View Items


	Four Conductor Aluminum Jacketed MC Cable and Grounding Conductor 600V
	Check up to five results to perform an action.

	larger image		Applications MC Cable is approved for use in many applications including direct burial, use in cable tray and outdoor exposure. The PVC jacket is free of harmful heavy metals in compliance with RoHS, Directive 2002/95/EC. Run from the combiner box to the inverter Suitable for rooftop solar applications Outdoors In wet locations (Type XHHW-2 , or RHW-2 conductors) Direct buried Encased in concrete Hazardous locations Strong, but lightweight alloy armor resists damage Suitable for wet locations, direct burial, encased in concrete and other uses per the NEC More flexible than conduit Factory tested engineered product that protects conductors from damage during installation Meets or exceeds requirements of the NEC, as well as applicable UL Standards. Specifications Single conductors are rated XHHW-2, and CT Use 1/0 AWG and larger Aluminum armor is rated for Direct Burial, using 6 AWG and larger conductors, with overall jacket Approved for use in certain hazardous locations as permitted in Articles 501, 502, 503 and 504 UL 1569, Metal Clad Cables UL 44, Rubber-Insulated wires and cables ICEA S-95-658 Standard for Non-shielded Power Cables Rated 2000 volts or less Construction Stranded Aluminum alloy (AA8000) compacted conductor, Class B stranding, per ASTM B 801. Flame retardant thermoset crosslinked polyethylene (XLPE) insulation. Grounding is one bare aluminum alloy (AA-8000)compacted stranded conductor. Phase and grounding conductors are cabled together with binder tape. Aluminum interlocked armor, applied over the binder tape and a longitudinal marker tape, for ID, when un-jacketed. Black sunlight resistant and flame retardant polyvinyl chloride (PVC) compound jacket. Notes Data is approximate and subject to normal manufacturing tolerances. For sizes not listed above please contact sales. The rating of the overcurrent device shown above is in accordance with the NEC® for single runs. See 240.4 and 240.6. Also, see 110.14 and Table 310.15(B)16 of the NEC.

Results Per Page :


Results 1 - 21 of 21		1

Item #	Conductor Size (AWG/KCMIL)	No. of Phase Conductors	Grounding Conductor Size (AWG/KCMIL)	Diameter of Conductor Assembly Under Armor (Inches)	Diameter of Cable Over Armor (Inches)	Overall Finished Diameter of Cable (Inches)	Cable Weight (LBS/MFT)	Rating of OC Device @ 75°C (AMPS)	Rated Ampacity @ 75°C (AMPS)

A6-04AIA-WG-600V	6	4	6	0.70	0.92	1.02	377	50	50

A4-04AIA-WG-600V	4	4	6	0.77	1.04	1.09	474	70	65

A2-04AIA-WG-600V	2	4	6	0.89	1.10	1.20	617	90	90

A1-04AIA-WG-600V	1	4	4	1.03	1.25	1.35	757	100	100

A1/0-04AIA-WG-600V	1/0	4	4	1.11	1.34	1.43	871	125	120

A2/0-04AIA-WG-600V	2/0	4	4	1.19	1.41	1.51	1071	150	135

A3/0-04AIA-WG-600V	3/0	4	4	1.32	1.58	1.70	1235	175	155

A4/0-04AIA-WG-600V	4/0	4	2	1.46	1.73	1.85	1480	200	180

A250-04AIA-WG-600V	250	4	1	1.60	1.89	2.01	1730	225	205

A300-04AIA-WG-600V	300	4	1	1.70	1.99	2.11	1970	250	230

A350-04AIA-WG-600V	350	4	1/0	1.83	2.11	2.23	2231	250	250

A400-04AIA-WG-600V	400	4	1/0	1.91	2.20	2.32	2469	300	270

A500-04AIA-WG-600V1	500	4	2/0	2.11	2.39	2.54	3028	350	310

A500-04AIA-WG-600V2	500	4	250	2.25	2.54	2.69	3166	350	310

A600-04AIA-WG-600V1	600	4	2/0	2.35	2.67	2.79	3591	350	340

A600-04AIA-WG-600V2	600	4	400	2.61	2.89	3.01	3886	350	340

A700-04AIA-WG-600V	700	4	2/0	2.58	2.86	3.01	4043	400	375

A750-04AIA-WG-600V1	750	4	3/0	2.60	2.86	3.01	4300	400	385

A750-04AIA-WG-600V2	750	4	750	3.04	3.30	3.50	4998	400	385

A900-04AIA-WG-600V1	900	4	250	2.84	3.12	3.29	5087	450	425

A900-04AIA-WG-600V2	900	4	900	3.32	3.60	3.77	5844	450	425


Results 1 - 21 of 21	1