ISO 9001:2008ISO 9001
Certified
A POWERFUL SOLUTION
All Categories > Medium Voltage Cables > PowerGuard® 35kV MV Aluminum TR-XLPE Collection System Cable LLDPE Jacket UL MV-90/AEIC CS8-07 > PowerGuard® 35kV 100% MV Aluminum 345 Mil TR-XLPE Collection System Cable LLDPE Jacket UL MV-90/AEIC CS8-07 > PowerGuard® 35kV 100% MV 345 Mil TR-XLPE AL Collection System Cable LLDPE Jacket Concentric Neutral UL MV-90/AEIC CS8-07 - PHYSICAL PROPERTIES (COMPACT) > View Items  

PowerGuard® 35kV 100% MV 345 Mil TR-XLPE AL Collection System Cable LLDPE Jacket Concentric Neutral UL MV-90/AEIC CS8-07 - PHYSICAL PROPERTIES (COMPACT)

Check up to five results to perform an action.

Applications
PowerGuard® cables are intended for use in wet or dry locations for distribution of single or three phase medium-voltage power. These cables may be installed in ducts or direct buried.

Description

Single conductor cable with filled strand aluminum conductors, triple extruded dry cured insulation system consisting of a thermosetting semiconducting conductor shield, high dielectric strength PowerGuard® TRXLPE insulation, thermosetting semiconducting insulation shield, copper concentric neutral wires, water blocking agents, black encapsulating linear low-density polyethylene (LLDPE) jacket.

Designed for 40 years service.

Construction
Conductor:
Class A or B compact concentric stranded aluminum alloy 1350. Stranded conductors are water-blocked with conductor filling compound.
Conductor Shield: Extruded thermosetting semiconducting shield which is free stripping from the conductor and bonded to the insulation.
Insulation: Extruded, Tree-Retardant Cross-linked Polyethylene (TRXLPE) as defined in ANSI/ICEA S-94-649 - 100% insulation level.
Insulation Shield: Extruded thermosetting semiconducting shield with controlled adhesion to the insulation providing the required balance between electrical integrity and ease of stripping.
Metallic Shield: Solid bare copper wires helically applied and uniformly spaced.
Water Block: Water-blocking agents applied over the insulation shield and around the neutral wires to resist longitudinal water penetration. Longitudinal water penetration shall be tested in accordance with the latest edition of ICEA T-34-664 except that the minimum requirements are 15 psig for 1 hour.
Jacket: Black insulating sunlight resistant linear low-density polyethylene encapsulating the neutral wires with three extruded red stripes and NESC lightning bolt symbol.

Insulation Temperature Rating
Normal  90º C
Emergency* 130 ºC
Short Circuit - Shield  200º C
Short Circuit - Conductor  250º C
*Operation at the emergency overload temperature shall not exceed 1500 hours cumulative during the lifetime of the cable.

Specifications
  • ASTM B-231 (Compact) or ASTM B-400 (Compressed)
  • AEIC CS8
  • ICEA S-94-649
  • ICEA T-31-610
  • ICEA T-34-664 as applicable for TRXLPE insulated concentric neutral cable
  • UL 1072 MV-90
  • CSA Standard C68.5-07 File # 257759 Primary Shielded and Concentric Neutral Cable for Distribution
Options
  • Copper Conductors
  • Black LLDPE jacket with no stripes
  • Multiplex cables
NOTES:
  1. Diameters are based on ASTM Class B Compact diameters.
  2. Extruded layer thicknesses, insulation and insulation shield diameters are in accordance with ANSI/ICEA S-94-649 for Concentric Neutral Cables Rated 5-46kV and also meet the requirements of the latest revisions of AEIC CS8. Dimensions and weights not designated as minimum or maximum are nominal values and are subject to manufacturing tolerances.

 






    Download PDF Download PDF   
    Email Email This Page  
    Save To Favorites Save To Favorites
  
   
  Results 1 - 45 of 45 1 

Item #

Cond.
Size
AWG
or
kcmil

Neutral
Size

Neutral
No.
of
Wires

Neutral
Size
of
Wires

Nominal
Diameter
(Inches)

Minimum
Insulation
Diameter
(Inches)

Maximum
Insulation
Diameter
(Inches)

Nominal
Jacket
Diameter
(Inches)

Aluminum
Cond.
Lbs/MFT

Copper
Neutral
Wires
Lbs/MFT

Total
Weight
Lbs/MFT

A1/0-01UD35GT000J 1/0 Full 16 14 .336 1.02 1.12 1.386 99 209 914
A1/0-01UD35GT200J 1/0 2/3 11 14 .336 1.02 1.12 1.386 99 144 841
A1/0-01UD35GT001J 1/0 1/2 8 14 .336 1.02 1.12 1.386 99 104 812
A1/0-01UD35GT100J 1/0 1/3 6 14 .336 1.02 1.12 1.386 99 78 802
A2/0-01UD35GT100J 2/0 Full 20 14 .376 1.06 1.16 1.43 125 266 982
A2/0-01UD35GT203J 2/0 2/3 14 14 .376 1.06 1.16 1.43 125 187 912
A2/0-01UD35GT102J 2/0 1/2 10 14 .376 1.06 1.16 1.43 125 133 865
A2/0-01UD35GX000J 2/0 1/3 7 14 .376 1.06 1.16 1.43 125 93 852
A3/0-01UD35GT000J 3/0 Full 16 12 .423 1.105 1.205 1.506 157 332 1190
A3/0-01UD35GT200J 3/0 2/3 17 14 .423 1.105 1.205 1.473 157 222 1044
A3/0-01UD35GT300J 3/0 1/2 13 14 .423 1.105 1.205 1.473 157 170 951
A3/0-01UD35UT103J 3/0 1/3 9 14 .423 1.105 1.205 1.473 157 118 944
A4/0-01UD35GT000J 4/0 Full 20 12 .475 1.16 1.26 1.561 198 415 1330
A4/0-01UD35GT200JKT 4/0 2/3 21 14 .475 1.16 1.26 1.528 198 274 1171
A4/0-01UD35GT050J 4/0 1/2 16 14 .475 1.16 1.26 1.528 198 209 1126
A4/0-01UD35GT050 4/0 1/3 11 14 .475 1.16 1.26 1.528 198 144 1074
A4/0-01UD35GT106J 4/0 1/6 6 14 .475 1.16 1.26 1.528 198 78 1020
A250-01UD35GT100J 250 1/3 13 14 .52 1.21 1.315 1.637 234 170 1160
A250-01UD35GT106J 250 1/6 10 16 .52 1.21 1.315 1.61 234 84 1069
A250-01UD35GT112J 250 1/12 6 16 .52 1.21 1.315 1.61 234 51 1033
A350-01UD35GT101J 350 Full 16 9 .616 1.31 1.41 1.832 328 667 1993
A350-01UD35GT200J 350 2/3 22 12 .616 1.31 1.41 1.764 328 458 1695
A350-01UD35GT000J 350 1/2 17 12 .616 1.31 1.41 1.764 328 354 1603
A350-01UD35GT100J 350 1/3 18 14 .616 1.31 1.41 1.731 328 235 1457
A350-01UD35GT300J 350 1/6 9 14 .616 1.31 1.41 1.731 328 117 1358
A350-01UD35GT112J 350 1/12 7 16 .616 1.31 1.41 1.704 328 59 1256
A500-01UD35GT200J 500 2/3 20 10 .736 1.43 1.53 1.937 469 662 2181
A500-01UD35GT001J 500 1/2 24 12 .736 1.43 1.53 1.894 469 498 1983
A500-01UD35GT100J 500 1/3 16 12 .736 1.43 1.53 1.894 469 332 1854
A500-01UD35GT1314J 500 1/6 13 14 .736 1.43 1.53 1.861 469 170 1669
A500-01UD35GT112J 500 1/12 10 16 .736 1.43 1.53 1.834 469 84 1629
A750-01UD35GT001J 750 1/2 23 10 .908 1.61 1.71 2.146 703 761 2727
A750-01UD35GT100J 750 1/3 24 12 .908 1.61 1.71 2.104 703 498 2434
A750-01UD35GT300J 750 1/6 19 14 .908 1.61 1.71 2.07 703 248 2163
A750-01UD35GT400J 750 1/12 10 14 .908 1.61 1.71 2.07 703 133 2076
A1000-01UD35GT001J 1000 1/2 30 10 1.06 1.76 1.865 2.278 937 993 3311
A1000-01UD35GT000J 1000 1/3 20 10 1.06 1.76 1.865 2.278 937 660 3015
A1000-01UD35GT100J 1000 1/6 16 12 1.06 1.76 1.865 2.235 937 332 2658
A1000-01UD35GT400J 1000 1/12 13 14 1.06 1.76 1.865 2.202 937 173 2455
A1250-01UD35GT100J 1250 1/3 25 10 1.25 1.96 2.065 2.493 1173 827 3755
A1250-01UD35GT000J 1250 1/6 20 12 1.25 1.96 2.065 2.45 1173 415 3225
A1250-01UD35GT400J 1250 1/12 16 14 1.25 1.96 2.065 2.417 1173 209 2984
A1500-01UD35GT100J 1500 1/3 24 9 1.37 2.078 2.183 2.674 1408 1002 4036
A1500-01UD35GT300J 1500 1/6 24 12 1.37 2.078 2.183 2.606 1408 497 3474
A1500-01UD35GT400J 1500 1/12 19 14 1.37 2.078 2.183 2.573 1408 248 3193
  Results 1 - 45 of 45 1 
Privacy     Site Map     Catalog IndexSite created by Thomas Web Solutions and Powered by Navigator Platform© 2021, American Wire Group