ISO 9001:2008ISO 9001
Certified
A POWERFUL SOLUTION
All Categories > Control Cables & Portable Power Cables > Control Cables > Control Cable/Power Cable FR-XLPE > Control Cable/Power Cable FR-XLPE Insulated Conductors, XLPO Jacket, 600V > Control Cable FR-XLPE Insulated Conductors, Smooth Helical Bare Copper Tape Shield, Low Smoke Zero Halogen Polyolefin XLPO Jacket, 600V > 12 AWG Control Cable FR-XLPE Insulated Conductors, Smooth Helical Bare Copper Tape Shield, Low Smoke Zero Halogen Polyolefin XLPO Jacket, 600V > View Items  

12 AWG Control Cable FR-XLPE Insulated Conductors, Smooth Helical Bare Copper Tape Shield, Low Smoke Zero Halogen Polyolefin XLPO Jacket, 600V

Check up to five results to perform an action.

Applications Control or signal cable for important circuits in industrial plants and station control cable for electric utilities where flame resistance is essential. Suitable for the operation and interconnection of protective devices; rated circuit voltage 600 volts; recommended for operation at 90 ºC maximum continuous conductor temperature in wet or dry locations. Cables may be installed in open air, in ducts or conduits, in tray or trough, and are suitable for direct burial. Utility grade meets or exceeds all UL requirements.

Construction Stranded coated copper conductors. The insulation shall be either fire retardant ethylene propylene rubber (EPR) or fire retardant cross-linked Polyethylene (FR-XLPE). ICEA Appendix E Method 1 color-coded, conductors twisted with suitable fillers, helically applied copper tape shield, XLPO jacket overall, surface printed.

Standards
  • TC Type Tray Cable per Article 340 of the NEC.
  • Individual conductors pass UL Standard 44 and the VW-1 vertical flame test.
  • Individual conductors approved as Type XHHW. 4.Cables Pass IEEE-383 ribbon burner flame test.
  • Overall jacket approved as Sunlight Resistant.
  • Cables meet requirements of ICEA Pub. No. S-66-524, NEMA Pub. No. WC7, Cross-linked Polyethylene Insulated Wire and Cable.
Notes
  • Cables may be supplied with an insulated ground and marked "Open Wiring."
  • Standard color coding is Method 1 for NEC applications per Appendix E, Table E-2 of ICEA S-73-532(TECH I006). This color coding method omits white and green from the color sequence. A white or green conductor can be supplied on request.
  • Color Coding also available ICEA Method 1, Table E-1; power sizes, ICEA Method 4.
Options
  • Bare or Tinned Copper
  • Flexible stranded conductors
  • E1 or E2 color codes
  • EPR Insulation
  • PVC, CPE, CSPE jackets
  • Overall copper tape shield
  • Overall copper braid shield
  • Overall longitudinal corrugated copper shield
  • Overall mylar tape shield with drain wire
  • 1000 volt rated construction
Consult AWG for a variety of alternate constructions for specific applications.





    Download PDF Download PDF   
    Email Email This Page  
    Save To Favorites Save To Favorites
  
   
  Results 1 - 7 of 7 1 

Item #

Number
of
Conductors

Conductor
Size
AWG

Conductor
Stranding

Copper
Shield
Thickness
(in)

Copper
Shield
Thickness
(mm)

Nominal
Jacket
Thickness
(in)

Nominal
Jacket
Thickness
(mm)

Nominal
Cable
O.D.
(in)

Nominal
Cable
O.D.
(mm)

Approximate
Weight
/MFT
(lb)

Approximate
Cable
Weight
kg/km

12-452SHX 2 12 7 0.005 0.13 0.045 1.1 0.485 12.3 137 204
12-453SHX 3 12 7 0.005 0.13 0.045 1.1 0.510 13.0 163 243
12-454SHX 4 12 7 0.005 0.13 0.060 1.5 0.585 14.9 225 335
12-455SHX 5 12 7 0.005 0.13 0.060 1.5 0.630 16.0 259 385
12-457SHX 7 12 7 0.005 0.13 0.060 1.5 0.675 17.1 322 479
12-459SHX 9 12 7 0.005 0.13 0.060 1.5 0.775 19.7 409 609
12-462SHX 12 12 7 0.005 0.13 0.080 2 0.905 23.0 552 821
  Results 1 - 7 of 7 1 
Privacy     Site Map     Catalog IndexSite created by Thomas Web Solutions and Powered by Navigator Platform© 2021, American Wire Group