USE-2 / RHH / RHW-2 EPR/CPE Copper Conductor 600V, 90°C Wet or Dry On American Wire Group


All Categories > Low Voltage Cables > Copper UL RHH/RHW-2 or USE-2 90°C 600V and 2kV > CU UL RHH/RHW-2 USE-2 600V > USE-2 / RHH / RHW-2 EPR/CPE Copper Conductor 600V, 90°C Wet or Dry > View Items


	USE-2 / RHH / RHW-2 EPR/CPE Copper Conductor 600V, 90°C Wet or Dry
	Check up to five results to perform an action.

	larger image		Applications Recommended for use in all low voltage circuits where continuity of service is the prime consideration. These cables may be installed in wet or dry locations, indoors or outdoors, in raceways, underground ducts, directly buried in the earth, or lashed to a messenger for aerial installation. These cables may also be installed in cable tray (size 1/0 AWG and larger per NEC 392.2). For use in free air, raceways or direct burial in accordance with NEC. Specifications Conductor: Uncoated copper solid per ASTM-B-3, compress stranded per ASTM B-8, or compact per ASTM B-496. Insulation: Meets or exceeds all requirements of ICEA S-95-658/NEMA WC-70 and UL Standards 44 and 854. Jacket: CPE. Listed by Underwriters Laboratories, Inc. as Type RHH or RHW-2 or USE-2, VW-1. Sizes 1/0 AWG and larger are also marked "sunlight resistant, for use in cable tray." Listed by CSA as RW-90, -25C, FT1 (1/0 and larger FT4), outdoor. Product Features Sizes 1/0 AWG and larger pass the Vertical Tray Flame Test requirements of UL 1581 for use in cable tray. Passes the IEEE 383-1974 Vertical Tray Flame Test. Passes the IEEE 1202-1991 Vertical Tray Flame Test. (sizes 1/0 AWG & larger). Extreme heat resistance; 90 ºC continuous rating, wet or dry 110 ºC hot spot rating 130 ºC emergency overload rating 250 ºC short circuit rating Notes These ampacities are based on single conductor in free air, 40 ºC ambient air temperature, 90 ºC conductor operating temperature. Options PVC or LSOH jacket

Results Per Page :


Results 1 - 15 of 15		1

Item #	Conductor Size AWG MCM (lb)	Conductor Stranding	Conductor Diameter (in)	Nominal Insulation (in)	Nominal Jacket Thickness Min. (in)	Nominal Jacket Thickness Min. (mm)	Nominal Jacket Thickness Approximate (in)	Nominal Jacket Thickness Approximate (mm)	Nominal Jacket Thickness Max. (in)	Nominal Jacket Thickness Max. (mm)	Nominal O.D. (in)	Approximate Weight /MFT	Ampacity 40 ºC Ambient Temp.

USE2-14	14 AWG	7	0.072	0.03	0.161	4.1	0.165	4.2	0.177	4.5	0.236	24	25

USE2-12	12 AWG	7	0.091	0.03	0.185	4.7	0.189	4.8	0.205	5.2	0.256	34	32

USE2-10	10 AWG	7	0.116	0.03	0.205	5.2	0.213	5.4	0.228	5.8	0.29	49	47

USE2-8	8 AWG	7	0.146	0.045	0.268	6.8	0.276	7	0.299	7.6	0.333	79	83

USE2-6	6 AWG	7	0.183	0.045	0.335	8.5	0.346	8.8	0.374	9.5	0.403	124	109

USE2-4	4 AWG	7	0.231	0.045	0.382	9.7	0.394	10	0.425	10.8	0.461	179	145

USE2-2	2 AWG	7	0.292	0.045	0.441	11.2	0.453	11.5	0.488	12.4	0.51	260	192

USE2-1/0	1/0 AWG	19	0.373	0.055	0.559	14.2	0.575	14.6	0.622	15.8	0.7	420	258

USE2-2/0	2/0 AWG	19	0.419	0.055	0.602	15.3	0.619	15.73	0.669	17	0.74	513	298

USE2-4/0	4/0 AWG	19	0.528	0.055	0.717	18.2	0.736	18.7	0.795	20.2	0.87	774	400

USE2-250	250 MCM	37	0.575	0.065	0.827	21	0.85	21.6	0.917	23.3	0.99	956	445

USE2-350	350 MCM	37	0.681	0.065	0.929	23.6	0.957	24.3	1.031	26.2	1.055	1290	552

USE2-500	500 MCM	37	0.813	0.065	1.055	26.8	1.088	27.64	1.177	29.9	1.125	1798	695

USE2-750	750 MCM	61	0.98	0.08	1.264	32.1	1.303	33.1	1.406	35.7	1.205	2686	898

USE2-1000	1000 MCM	61	1.152	0.08	1.413	35.9	1.457	37	1.575	40	1.305	3463	1076


Results 1 - 15 of 15	1