12 AWG FR-XLP CPE Jacket, 600V On American Wire Group


All Categories > Control Cables & Portable Power Cables > Control Cables > Control Cable/Power Cable FR-XLPE > Control Cable/Power Cable FR-XLPE Insulated Conductors, CPE Jacket, 600V > Control Cable FR-XLPE Insulated Conductors, CPE Jacket, 600V > 12 AWG FR-XLP CPE Jacket, 600V > View Items


	12 AWG FR-XLP CPE Jacket, 600V
	Check up to five results to perform an action.

	larger image		Applications As flame-retardant multi-conductor control, signal or power cables rated 600 volts, 90 ºC in wet or dry locations. Specifically approved for installation in cable trays per Article 336 of the NEC. Also approved for use in Class I remote-control and signaling circuits per Article 725 of the NEC. Type TC cable is suitable for use in Class I and II, Division 2 hazardous locations. Cables may be installed in air, in ducts or conduits, in tray or trough, and are suitable for direct burial. Construction Stranded uncoated copper conductors, 30 mils FR-XLPE flame-retardant crosslinked polyethylene insulation, color coded, two conductors flat, three or more conductors twisted with suitable fillers where necessary to make round, cable tape, CPE jacket overall, surface printed. Standards Listed by UL as Type TC per Standard 1277 for Tray Cables. Cables UL listed for Direct Burial. Individual conductors pass UL VW-1 flame test. Individual conductors UL listed as Type XHHW-2. Overall jacket UL listed as Sunlight Resistant. Cables with grounding conductor UL listed for Open Wiring. Cables pass IEEE-383 ribbon burner flame test and ICEA 210,000 BTU/hour test. Cables pass IEEE1202/CSA FT4 (70,000 BTU/hr) cable tray flame test. Cables meet requirements of ICEA S-73-532, NEMA WC70 for Control Cables. Notes Cables may be supplied with an insulated ground and marked "Open Wiring." Standard color coding is Method 1 for NEC applications per Appendix E, Table E-2 of ICEA S-73-532(TECH I006). This color coding method omits white and green from the color sequence. A white or green conductor can be supplied on request. Color Coding also available ICEA Method 1, Table E-1; power sizes, ICEA Method 4. Options Bare or Tinned Copper Flexible stranded conductors E1 or E2 color codes EPR Insulation PVC, CSPE, LSOH jackets Overall copper tape shield Overall copper braid shield Overall longitudinal corrugated copper shield Overall mylar tape shield with drain wire 1000 volt rated construction Consult AWG for a variety of alternate constructions for specific applications.

Results Per Page :


Results 1 - 13 of 13		1

Item #	No. of Conductors	Size AWG	Number of Strands	Nominal Insulation Thickness (in)	Nominal Insulation Thickness (mm)	Nominal Jacket Thickness (in)	Nominal Jacket Thickness (mm)	Nominal Cable O.D. (in)	Nominal Cable O.D. (mm)	Copper Weight lbs/MFT	Copper Weight kg/km	Approximate Cable Weight /MFT (lb)	Approximate Cable Weight /MFT (kg)

12-R-CPE-2-FLAT	2-Flat	12	7/.0305	0.030	0.76	0.045	1.14	.245x.400	6.22x10.16	40	60	86	128

12-R-CPE-2	2	12	7/.0305	0.030	0.76	0.045	1.14	0.410	10.410	41	61	96	143

12-R-CPE-3+GRND	3+Grnd	12	7/.0305	0.030	0.76	0.045	1.14	0.435	11.050	86	128	143	213

12-R-CPE-3	3	12	7/.0305	0.030	0.76	0.045	1.14	0.435	11.050	65	96	125	186

12-R-CPE-4	4	12	7/.0305	0.030	0.76	0.045	1.14	0.475	12.070	86	128	157	234

12-R-CPE-5	5	12	7/.0305	0.030	0.76	0.045	1.14	0.515	13.080	108	160	191	284

12-R-CPE-7	7	12	7/.0305	0.030	0.76	0.06	1.52	0.595	15.110	150	224	260	387

12-R-CPE-9	9	12	7/.0305	0.030	0.76	0.06	1.52	0.695	17.650	193	288	340	506

12-R-CPE-12	12	12	7/.0305	0.030	0.76	0.06	1.52	0.780	19.810	258	385	429	638

12-R-CPE-19	19	12	7/.0305	0.030	0.76	0.08	2.03	0.930	23.620	403	600	681	1013

12-R-CPE-25	25	12	7/.0305	0.030	0.76	0.08	2.03	1.095	27.810	515	767	885	1317

12-R-CPE-30	30	12	7/.0305	0.030	0.76	0.08	2.03	1.150	29.210	618	920	1005	1496

12-R-CPE-37	37	12	7/.0305	0.030	0.76	0.08	2.03	1.240	31.500	741	1103	1185	1764


Results 1 - 13 of 13	1