10 AWG EPR, CPE Jacket, 600V On American Wire Group

ISO 9001
Certified


All Categories > Control Cables & Portable Power Cables > Control Cables > Control Cable/Power Cable EPR > Control Cable / Power Cable EPR Insulated Conductors, CPE Jacket, 600V > Control Cable EPR Insulated Conductors, CPE Jacket, 600V > 10 AWG EPR, CPE Jacket, 600V > View Items


	10 AWG EPR, CPE Jacket, 600V
	Check up to five results to perform an action.

	larger image		Applications As flame-retardant multi-conductor control, signal or power cables rated 600 volts, 90 ºC in wet or dry locations. Specifically approved for installation in cable trays per Article 336 of the NEC. Also approved for use in Class I remote-control and signaling circuits per Article 725 of the NEC. Type TC cable is suitable for use in Class I and II, Division 2 hazardous locations. Cables may be installed in air, in ducts or conduits, in tray or trough, and are suitable for direct burial. Construction Stranded uncoated copper conductors, 30 mils Flame Retardant Ethylene Propylene Rubber (FR-EPR) insulation, color coded, two conductors flat, three or more conductors twisted with suitable fillers where necessary to make round, cable tape, CPE jacket overall, surface printed. Standards Listed by UL as Type TC per Standard 1277 for Tray Cables. Cables UL listed for Direct Burial. Individual conductors pass UL VW-1 flame test. Individual conductors UL listed as Type XHHW-2. Overall jacket UL listed as Sunlight Resistant. Cables with grounding conductor UL listed for Open Wiring. Cables pass IEEE-383 ribbon burner flame test and ICEA 210,000 BTU/hour test. Cables pass IEEE1202/CSA FT4 (70,000 BTU/hr) cable tray flame test. Cables meet requirements of ICEA S-73-532, NEMA WC70 for Control Cables. Notes Cables may be supplied with an insulated ground and marked ""Open Wiring."" Standard color coding is Method 1 for NEC applications per Appendix E, Table E-2 of ICEA S-73-532(TECH I006). This color coding method omits white and green from the color sequence. A white or green conductor can be supplied on request. Color Coding also available ICEA Method 1, Table E-1; power sizes, ICEA Method 4. Options Bare or Tinned Copper Flexible stranded conductors E1 or E2 color codes EPR Insulation PVC, CSPE, LSOH jackets Overall copper tape shield Overall copper braid shield Overall longitudinal corrugated copper shield Overall Mylar tape shield with drain wire 1000 volt rated construction Consult AWG for a variety of alternate constructions for specific applications.

Results Per Page :


Results 1 - 8 of 8		1

	Item #		No. of Conductors		Size AWG		Number of Strands		Nominal Insulation Thickness (in)		Nominal Insulation Thickness (mm)		Nominal Jacket Thickness (in)		Nominal Jacket Thickness (mm)		Nominal Cable O.D. (in)		Nominal Cable O.D. (mm)		Copper Weight lbs/MFT		Copper Weight kg/km		Approximate Cable Weight /MFT (lb)		Approximate Cable Weight /MFT (kg)

	10-E-CPE-2-FLAT		2 FLAT		10		7/.0385		0.030		0.76		0.045		1.14		.445x.270		11.30x6.90		64		95		113		168

	10-E-CPE-2		2		10		7/.0385		0.030		0.76		0.045		1.14		0.455		11.560		65		97		128		190

	10-E-CPE-3		3		10		7/.0385		0.030		0.76		0.045		1.14		0.485		12.320		100		150		172		256

	10-E-CPE-4		4		10		7/.0385		0.030		0.76		0.06		1.52		0.560		14.220		134		199		234		348

	10-E-CPE-5		5		10		7/.0385		0.030		0.76		0.06		1.52		0.615		15.620		167		249		284		423

	10-E-CPE-7		7		10		7/.0385		0.030		0.76		0.06		1.52		0.670		17.020		234		349		381		567

	10-E-CPE-9		9		10		7/.0385		0.030		0.76		0.06		1.52		0.760		19.300		295		440		464		691

	10-E-CPE-12		12		10		7/.0385		0.030		0.76		0.08		2.03		0.950		22.990		402		598		651		969


Results 1 - 8 of 8	1

Privacy Site Map Catalog IndexSite created by Thomas Web Solutions and Powered by Navigator Platform© 2021, American Wire Group