ISO 9001:2008ISO 9001
Certified
A POWERFUL SOLUTION
All Categories > Control Cables & Portable Power Cables > Portable Power Cables > Type MP-GC (Mine Power Feeder) > Type MP-GC 3-Conductor EPR/CPE or XLP/CPE 5kV 100% Insulated Level (Grounded) 90°C > Type MP-GC 3-Conductor - EPR/CPE or XLP/CPE 5kV) 100% Insulation Level (Grounded) 90°C > Item # MP5-08-500  

Item # MP5-08-500, Type MP-GC 3-Conductor - EPR/CPE or XLP/CPE 5kV) 100% Insulation Level (Grounded) 90°C


    Download PDF Download PDF   
    Email Email This Page  
    Save To Favorites Save To Favorites
  

Image Applications
This cable is designed for high voltage connections between power distribution systems in mines, mine tunnels, shafts, and mine load centers where continuous monitoring of the ground system is required. This cable is suitable for installation in Ducts, troughs, tray or direct burial for non-flexing service.

Construction
  • Conductor is stranded annealed copper enveloped in a strand shield.
  • Insulation is Ethylene Propylene Rubber (EPR) or Cross Linked Polyethylene (XLPE).
  • Assembly is semi-conducting tape and a metallic tape shield with grounding conductors consisting of two bare grounds and one 8-gauge insulated ground check that are cabled together in the interstices of the power conductors and fillers are added to make round.
  • A single faced rubber filled tape is applied overlapped.
  • Jacket is Chlorinated Polyethylene (CPE).
Standards
Conforms to ICEA S-66-524 (NEMA WC8).

Notes
  • Shipping tolerance +/- 10%






Specifications

Power
Conductors
Size AWG

500

Power
Conductors
# of Strands

37

Ground Wire
Size AWG

4/0

Ground Wire
# of Strands

19

Jacket
Thickness
(Inches)

2.64


Privacy     Site Map     Catalog IndexSite created by Thomas Web Solutions and Powered by Navigator Platform© 2021, American Wire Group