Applications
This cable is suitable for wiring down tower applications and may be used on electrically driven, earth moving equipment, as power supply to A.C. welding equipment, as water heater leads, and in motor and power lead applications. May be installed in wet or dry areas, conduit, ducts, trays or troughs.

Construction

  • Conductor is extra flexible tinned, stranded copper with a separator layer.
  • EPR insulation.
  • Jacket is LSOH (Low Smoke Zero Halogen).  CPE Jacket available upon request.

Standards

  • Meets flame test requirements of MSHA and passes ICEA cold bend test at -40°C.
  • Meets AAR specifications.
  • UL listed as RHH-RHW-2.
  • Rated for CT use, 1/0 and larger.

Notes

  • Ampacity based on single conductor in free air, 90 ºC conductor temperature, 40 ºC ambient per ICEA S-75-381.
  • Sequential footage marks.
  • Shipping tolerance +/- 10%

 

Unit of Measure

Specifications

Area
Circular
(mls)

N/A 373700

Size
(AWG or kcmil)

N/A 373.7

Number
of Strands
in Conductor

N/A 925

Insulation
Thickness
(mls)

N/A 90

Jacket
Thickness
(mils)

N/A 65

Overall
Diameter

N/A 1.11 Inches

Net Weight
Per MFT

N/A 1500 Lbs

Ampacity
1/C
in Free Air
90 ºC

N/A 574