Applications
This cable is suitable for powering wind tower applications, electrically driven earth moving equipment, battery energy storage, welding equipment, and in motor and power lead applications. It can be installed in wet or dry areas, conduit, ducts, trays or troughs.

Construction

  • Conductor is extra flexible tinned, stranded copper with a separator layer.
  • EPR insulation.
  • Jacket is LSOH (Low Smoke Zero Halogen).  CPE Jacket available upon request.

 Standards

  • ASTM 83 - Soft or Annealed Copper
  • ASTM 833 - Tinned Soft or Annealed Copper
  • ASTM 8172 - Rope-Lay-Stranded Copper Conductors Having Bunch Stranded Members
  • UL 44 - Type RHH/RHW-2
  • UL 1685 - Fire-Propagation and Smoke-Release Test
  • UL Subject 2806 - Type DLO
  • CSA C22.2 No. 38 - Type RW90. (#12 and #10 AWG are not RW90)
  • Meets flame test requirements of MSHA and passes ICEA cold bend test at -40 ºC.
  • IEEE 1202/FT 4 - Flame Test  #8 and larger CSA. 1 /0 and larger UL
  • ICEA S-95-658 (NEMA WC70) Power cables rated 2000 volts or less for the distribution of electrical energy
  • Rated for CT use, 1/0 and larger.

 Notes

  • Ampacity based on single conductor in free air, 90 ºC conductor temperature, 40 ºC ambient per ICEA S-75-381.
  • Sequential footage marks.
  • Shipping tolerance +/- 10%

 

Unit of Measure

Specifications

Area
Circular
(mls)

N/A 181800

Size
(AWG or kcmil)

N/A 3/0

Number
of Strands
in Conductor

N/A 450

Insulation
Thickness
(mls)

N/A 80

Jacket
Thickness
(mils)

N/A 45

Overall
Diameter

N/A .80 Inches

Net Weight
Per MFT

N/A 780 Lbs

Ampacity
1/C
in Free Air
90 ºC

N/A 350