Applications

Control or signal cable for important circuits in industrial plants and station control cable for electric utilities where flame resistance is essential. Suitable for the operation and interconnection of protective devices; rated circuit voltage 600 volts; recommended for operation at 90°C maximum continuous conductor temperature in wet or dry locations. Cables may be installed in open air, in ducts or conduits, in tray or trough, and are suitable for direct burial.

Specifications

  • Conductors conform to ASTM B-3 & B-8.
  • Insulation conforms to UL Standard 44.
  • TC Type Tray Cable per Article 340 of the NEC.
  • Cables designed to pass the IEEE-383 & IEEE-1202 tests.
  • Jacket suitable for Sunlight Resistant applications.
  • Cables meet requirements of ICEA S-73-532 and ICEA S-95-658/NEMA WC70.

Construction

Stranded copper conductors, XLP insulated, Method 1 - Table E1 or E2 color coded or Method 4 phase-identified, conductors twisted with suitable fillers, Longitudinal Corrugated Bare Copper Tape Shield, LSZH jacket overall, surface printed.

Options

Also available with -G Ground Wire, -SH Mylar Aluminum Foil Shield, No Shield

Notes

Dimensional data not binding, we reserve the right to alter specifications without notice. SHIPPING TOLERANCE +/- 10%

Conductor Size
AWG or kcmil

N/A 14

Number
of
Conductors

N/A 15

O.A.
(mils)

N/A 60

O.D.
(mils)

N/A 0.8

Weight
(lb/1000 ft)

N/A 450