ISO 9001:2008ISO 9001
Certified
A POWERFUL SOLUTION
Duct Materials
The duct shall be extruded from either medium density polyethylene type II, class C, category 5, or high density polyethylene type III, class C, category 5 as outlined in ASTM D1248.

Duct Dimensions
The following duct dimensions are recommended, however, AWG will provide duct to customer's required dimensions when specified.
Unit of Measure

Specifications

Conduit
Size

N/A 1 1/2 Inches

Conduit
Outer
Diameter

N/A 1.90 Inches

Minimum
Wall
Thickness

N/A 115 mls

Bending
Radius

N/A 21 Inches

Max.
Cable
Diameter

N/A 1.20 Inches

Typical
Unjacketed
Cond. Size

N/A 1/0 through 250

Tensil Strength Min. - Medium

N/A 2400 psi

Tensil Strength Min. - High

N/A 3200 psi

Elongation

N/A 400 %

Melt
Index
Max.

N/A .4

Thermal Stress Crack Resistance-no cracking, hrs, min. - Medium

N/A 96 hrs

Thermal Stress Crack Resistance-no cracking, hrs, min. - High

N/A 168 hrs

Environmental Stress Crack Resistance-hrs to 20% Failure min. 48 - Medium

N/A 48 min.

Environmental Stress Crack Resistance-hrs to 20% Failure min. 48 - High

N/A 48 min.

Brittleness
Temp.
ºC max.
Medium

N/A -45 ºC

Brittleness
Temp.
ºC max.
High

N/A -75 ºC

Note

N/A

  • Schedule 40 duct also available

FacebookTweeterLinkedInYouTube
Privacy     Site Map     Catalog IndexSite created by Thomas Web Solutions and Powered by Navigator Platform© 2019, American Wire Group