ISO 9001:2008ISO 9001
Certified
A POWERFUL SOLUTION
  • 175 MIL EPR<br>15kV URD Cable Full Neutral<br>Copper Conductor

    Applications
    For use on single phase and three phase primary underground distribution systems operating at 15kV phase to phase at 100 % insulation level. Suitable for either direct burial or installation in ducts.

    Construction
    Copper concentrically stranded compressed conductor, triple single head extruded conductor shield, EPR (ethylene propylene rubber) insulation and easy strippable insulation shield, all dry nitrogen cured; solid bare copper wires uniformly spaced around the cable as a concentric neutral; LLDPE jacket with extruded longitudinal colored stripes, surface printed.

    Standards

    • AEIC CS8 Specification for Extruded Dielectric Shielded Power Cables Rated 5 through 46kV
    • ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5,000 - 46,000V
    • ICEA T-31-610 Guide for Conducting a Longitudinal Water Penetration Resistance Tests on Blocked Conductors
    • ICEA T-34-664 Test Method for Conducting Longitudinal Water Penetration Resistance Tests on Longitudinal Water Blocked Cables
    Notes
    • Maximum conductor temperature: 90ºC normal continuous, 130 ºC overload, 250 ºC short circuit.

  • 175 MIL EPR<br>15kV URD Cable Full Neutral<br>Copper Conductor

    Applications
    For use on single phase and three phase primary underground distribution systems operating at 15kV phase to phase at 100 % insulation level. Suitable for either direct burial or installation in ducts.

    Construction
    Copper concentrically stranded compressed conductor, triple single head extruded conductor shield, EPR (ethylene propylene rubber) insulation and easy strippable insulation shield, all dry nitrogen cured; solid bare copper wires uniformly spaced around the cable as a concentric neutral; LLDPE jacket with extruded longitudinal colored stripes, surface printed.

    Standards

    • AEIC CS8 Specification for Extruded Dielectric Shielded Power Cables Rated 5 through 46kV
    • ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5,000 - 46,000V
    • ICEA T-31-610 Guide for Conducting a Longitudinal Water Penetration Resistance Tests on Blocked Conductors
    • ICEA T-34-664 Test Method for Conducting Longitudinal Water Penetration Resistance Tests on Longitudinal Water Blocked Cables
    Notes
    • Maximum conductor temperature: 90 ºC normal continuous, 130 ºC overload, 250 ºC short circuit.

  • 175 MIL EPR<br>15kV URD Cable Full Neutral<br>Copper Conductor

    Applications
    For use on single phase and three phase primary underground distribution systems operating at 15 kV phase to phase at 100 % and 133 % insulation level. Suitable for either direct burial or installation in ducts.

    Construction
    Copper concentrically stranded compressed conductor, triple single head extruded conductor shield, EPR (ethylene propylene rubber) insulation and easy strippable insulation shield, all dry cured; solid bare copper wires uniformly spaced around the cable as a concentric neutral; LLDPE jacket with extruded longitudinal colored stripes, surface printed.

    Standards

    • AEIC CS8 Specification for Extruded Dielectric Shielded Power Cables Rated 5 through 46 kV
    • ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5,000 - 46,000 V
    • ICEA T-31-610 Guide for Conducting a Longitudinal Water Penetration Resistance Tests on Blocked Conductors
    • ICEA T-34-664 Test Method for Conducting Longitudinal Water Penetration Resistance Tests on Longitudinal Water Blocked Cables
    Notes
    • Maximum conductor temperature: 90 ºC normal continuous, 130 ºC overload, 250 ºC short circuit.

  • 175 MIL EPR<br>15kV URD Cable Full Neutral<br>Copper Conductor

    Applications
    For use on single phase and three phase primary underground distribution systems operating at 15 kV phase to phase at 100 % and 133 % insulation level. Suitable for either direct burial or installation in ducts.

    Construction
    Copper concentrically stranded compressed conductor, triple single head extruded conductor shield, EPR (ethylene propylene rubber) insulation and easy strippable insulation shield, all dry cured; solid bare copper wires uniformly spaced around the cable as a concentric neutral; LLDPE jacket with extruded longitudinal colored stripes, surface printed.

    Standards

    • AEIC CS8 Specification for Extruded Dielectric Shielded Power Cables Rated 5 through 46 kV
    • ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5,000 - 46,000 V
    • ICEA T-31-610 Guide for Conducting a Longitudinal Water Penetration Resistance Tests on Blocked Conductors
    • ICEA T-34-664 Test Method for Conducting Longitudinal Water Penetration Resistance Tests on Longitudinal Water Blocked Cables
    Notes
    • Maximum conductor temperature: 90 ºC normal continuous, 130 ºC overload, 250 ºC short circuit.

  • URD Cable<br>Copper and Aluminum

    Applications
    For use on single phase and three phase primary underground distribution systems operating at 15kV phase to phase at 100% insulation level. Suitable for either direct burial or installation in ducts.

    Construction
    Aluminum concentrically stranded compressed conductor, triple single head extruded conductor shield, EPR (ethylene propylene rubber) insulation and easy strippable insulation shield, all dry nitrogen cured; solid bare copper wires uniformly spaced around the cable as a concentric neutral; LLDPE jacket with extruded longitudinal colored stripes, surface printed.

    Standards

    • AEIC CS8 Specification for Extruded Dielectric Shielded Power Cables Rated 5 through 46kV.
    • ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5,000 - 46,000V.
    • ICEA T-31-610 Guide for Conducting a Longitudinal Water Penetration Resistance Tests on Blocked Conductors.
    • ICEA T-34-664 Test Method for Conducting Longitudinal Water Penetration Resistance Tests on Longitudinal Water Blocked Cables.
    Notes
    • Maximum conductor temperature: 90 ºC normal continuous, 130 ºC overload, 250 ºC short circuit.

  • URD Cable<br>Copper and Aluminum

    Applications
    For use on single phase and three phase primary underground distribution systems operating at 15kV phase to phase at 100% insulation level. Suitable for either direct burial or installation in ducts.

    Construction
    Aluminum concentrically stranded compressed conductor, triple single head extruded conductor shield, EPR (ethylene propylene rubber) insulation and easy strippable insulation shield, all dry nitrogen cured; solid bare copper wires uniformly spaced around the cable as a concentric neutral; LLDPE jacket with extruded longitudinal colored stripes, surface printed.

    Standards

    • AEIC CS8 Specification for Extruded Dielectric Shielded Power Cables Rated 5 through 46kV
    • ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5,000 - 46,000V
    • ICEA T-31-610 Guide for Conducting a Longitudinal Water Penetration Resistance Tests on Blocked Conductors
    • ICEA T-34-664 Test Method for Conducting Longitudinal Water Penetration Resistance Tests on Longitudinal Water Blocked Cables
    Notes
    • Maximum conductor temperature: 90 ºC normal continuous, 130 ºC overload, 250 ºC short circuit.

  • URD Cable<br>Copper and Aluminum

    Applications
    For use on single phase and three phase primary underground distribution systems operating at 15k V phase to phase at 100 % and 133 % insulation level. Suitable for either direct burial or installation in ducts.

    Construction
    Aluminum concentrically stranded compressed conductor, triple single head extruded conductor shield, EPR (ethylene propylene rubber) insulation and easy strippable insulation shield, all dry cured; solid bare copper wires uniformly spaced around the cable as a concentric neutral; LLDPE jacket with extruded longitudinal colored stripes, surface printed.

    Standards

    • AEIC CS8 Specification for Extruded Dielectric Shielded Power Cables Rated 5 through 46 kV
    • ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5,000 - 46,000 V
    • ICEA T-31-610 Guide for Conducting a Longitudinal Water Penetration Resistance Tests on Blocked Conductors
    • ICEA T-34-664 Test Method for Conducting Longitudinal Water Penetration Resistance Tests on Longitudinal Water Blocked Cables
    Notes
    • Maximum conductor temperature: 90 ºC normal continuous, 130 ºC overload, 250 ºC short circuit.

  • URD Cable<br>Copper and Aluminum

    Applications
    For use on single phase and three phase primary underground distribution systems operating at 15 kV phase to phase at 100 % and 133 % insulation level. Suitable for either direct burial or installation in ducts.

    Construction
    Aluminum concentrically stranded compressed conductor, triple single head extruded conductor shield, EPR (ethylene propylene rubber) insulation and easy strippable insulation shield, all dry cured; solid bare copper wires uniformly spaced around the cable as a concentric neutral; LLDPE jacket with extruded longitudinal colored stripes, surface printed.Standards

    • AEIC CS8 Specification for Extruded Dielectric Shielded Power Cables Rated 5 through 46 kV
    • ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5,000 - 46,000 V
    • ICEA T-31-610 Guide for Conducting a Longitudinal Water Penetration Resistance Tests on Blocked Conductors
    • ICEA T-34-664 Test Method for Conducting Longitudinal Water Penetration Resistance Tests on Longitudinal Water Blocked Cables
    Notes
    • Maximum conductor temperature: 90 ºC normal continuous, 130 ºC overload, 250 ºC short circuit.

FacebookTweeterLinkedInYouTube
Privacy     Site Map     Catalog IndexSite created by Thomas Web Solutions and Powered by Navigator Platform© 2017, American Wire Group