ISO 9001:2008ISO 9001
  • Solar Tracker Motor Cable


    As three-conductor power cables rated 2000 volts, 90°C in dry or wet locations for Solar PV generation, this cable is connected to the tracker motors. Approved for installation in cable trays per Article 336 of the NEC. Type TC-ER cables are approved for use in Class 1, Division 2 hazardous locations.  Cables may be installed in open air, in ducts or conduits, or in tray or trough. All cables when used in accordance with the NEC, meet the requirements of OSHA.


    • Copper conductors conform to ASTM B-3 and B-8.
    • Insulated conductors RHH/RHW-2 Type per UL 44, USE-2 Type per UL 854, and PV Type per UL 4703, UL 1277 Type TC-ER
    • Cable is suitable for sunlight resistant and direct burial applications, and is approved For CT Use.
    • Cable meets the requirements of ICEA S-95-658/NEMA WC70.


    Stranded copper conductors, XLP (Cross-Linked Polyethylene) insulation, Method 4 phase-identified; three insulated conductors cabled together with a stranded copper grounding conductor in one interstice, fillers as necessary, cable tape, black sunlight-resistant PVC (Polyvinyl Chloride) jacket overall, surface printed.


    • Dimensions are approximate and subject to normal manufacturing tolerances.
    UL 1581 VW-1 compliance available on request

Privacy     Site Map     Catalog IndexSite created by Thomas Web Solutions and Powered by Navigator Platform© 2020, American Wire Group