• B-230 Aluminum Wire, 1350-H19 for Electrical Purposes.
• B-231 Aluminum 1350 conductors, Concentric-Lay-Stranded.
• B-786 ""19 Wire combination unilay-stranded Aluminum Conductors for subsequent insulation"".
• B-901 ""Compressed round stranded Aluminum Conductors using single input wire construction"".
• Secondary UD duplex conductor 600V cable meets or exceeds all applicable requirements of ICEA S-105-692.
• ""USE-2"" per UL 854 available upon request.

• Cable in Duct
• Abrasion Resistant

• B-800 8000 Series Aluminum Alloy Wire for Electrical Purposes
• B-801 Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation.
• B-901 "Compressed round stranded Aluminum Conductors using single input wire construction".
• Secondary UD triplex conductor 600V cable meets or exceeds all applicable requirements of ICEA S-105-692.
• UL Standard 44 for Type RHH or RHW-2
• UL standard 854 for Type USE-2.

• Cable in Duct
• Abrasion Resistant

Application
Used for secondary distribution and underground service at 600 volts or less, either direct burial or in ducts. Especially suited for applications requiring superior resistance to mechanical damage. Rated 90°C continuous operation, 130°C emergency overload and short circuit 250°C.

Construction
Conductors are stranded, compressed 1350-H16/H26 aluminum, insulated with a cross-linked polyethylene meeting the requirements of ANSI/ICEA S-81-570. Neutrals are triple yellow extruded stripe and have sequential footage markers. Conductors are durably surface printed for identification.

Standards
Ruggedized duplex 600 volt secondary UD cable meets or exceeds the following applicable ASTM specifications:

• B-231 Aluminum 1350 Conductors, Concentric-Lay-Stranded.
• B-609 Aluminum 1350 Round Wire, Annealed and Intermidiate Tempers, for Electrical Purposes.
• B-786 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation.
• B-901 Compressed Round Stranded Aluminum Conductors Using Single Input Wire.

Ruggedized triplex 600 volt secondary UD cable insulation meets or exceeds all grade and type requirements of ICEA S-81-570 and UL Standard 854 for Type USE-2.


Notes
+Ampacity: 90°C conductor temperature, 20°C ambient temperature, RHO factor 90. For NEC Applications, use NEC Table 310.16 Ampacities.